- 期刊
- OpenAccess
Study of the Interaction Model of PDC Cutters with Rock
並列摘要
The existing PDC cutters with rock interaction models does not match the actual drilling condition, because WOB can't be loaded on their equipment, the influence of the cutting velocity on the force of cutters doesn't be considered. A drilling experiment was carried out in the experimental device in which cutters can be loaded WOB. The relationship of cutting area, cutting speed, back dip angle of PDC cutter and rock performance with the force of PDC cutter were considered. The multiple nonlinear regression analysis were done on the basis of the experimental data, a new cutter-rock interaction model was established. The cutter area is the principal component influencing the force of cutters though the cluster analysis and principal component analysis. It is a logarithmic relationship between cutting velocity and the force of cutter, the theory of particle dynamics confirms this relationship.
延伸閱讀
- 郭紫榛（2015）。Development of a Prediction Model for the CPC C2 Stripper〔碩士論文，國立清華大學〕。華藝線上圖書館。https://doi.org/10.6843/NTHU.2015.00062
- Hao, Z. (2022). Analysis of Influence Factors of the Didi Operating System Based on the Interpretive Structure Model. World Scientific Research Journal, 8(6), 487-497. https://doi.org/10.6911/WSRJ.202206_8(6).0063
- 黃克明（2015）。UTILITY THEORY MODEL FOR PROJECT SITE SELECTION。營建管理季刊，(102)，33-50。https://doi.org/10.6505/CMJ-2015-102-33-18
- 陳以孝（2005）。A Study on the Design of Models Used in the Technology Evaluation during the Technology Transfer〔碩士論文，崑山科技大學〕。華藝線上圖書館。https://doi.org/10.6828/KSU.2005.00016
- 江文瑋（2019）。A Pilot Study on a Guided Model of Reciprocal Representation Instructional Strategy。國民教育學報，(16)，19-32。https://www.airitilibrary.com/Article/Detail?DocID=18146783-N202301170003-00002