- 期刊
- OpenAccess
Analysis and Simulation of Quick-return Characteristics in Offset Slider-crank Mechanism
並列摘要
In this paper, the analytical formulas of the offset slider-crank mechanism are deduced. Data curves are presented to express the relationship among the travel speed ratio coefficient K, the minimum transmission angle γ_(min), the eccentric distance e, the crank length l_1, and the connecting rod length l_2. The quick-return characteristics and main design parameters are discussed. Given the main design parameters, the kinematics simulation is done. Through the results of motion simulation, the feasibility of mechanism is verified.
被引用紀錄
李敏存（2013）。小型斷路器應用於住宅大樓用電安全評估之研究〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2013.00246
延伸閱讀
- 鄭淵明（2009）。Analysis of Mechanism Stiffness for a 3 Axes Parallel Motion Manipulator with 3-DOF Z α β。機械技師學刊，2(3)，30-35。https://doi.org/10.6208/JPME-2009-03-05
- Lin, K. W. (2001). Vibration Analysis of the Cracked and Flexible Connecting Rod in a Crank-Slider Mechanism [master's thesis, Chung Yuan Christian University]. Airiti Library. https://doi.org/10.6840/cycu200100394
- 陳錫安（1995）。Simulation and Analysis of Cracked Rotor-Bearing Systems〔碩士論文，元智大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0009-0112200611363661
- 陳展耀（2011）。On the Design of the Motion and Dynamic Characteristics of a Slider-Crank Mechanism〔碩士論文，崑山科技大學〕。華藝線上圖書館。https://doi.org/10.6828/KSU.2011.00090
- Huang, J. S., Fung, R. F., Chen, Y. C., & Yang, R. T. (1996). Kinematic and Dynamic Analyses of a Crank-Shaper Quick Return Mechanism. 中原學報, 24(1), 13-21. https://doi.org/10.6358/JCYU.199601.0013