摘要
3D列印產業在2015年發生了巨大的變化，產業雙雄3D Systems與Stratasys業績平平，不再有高幅度的成長，在獲利方面也大不如前，甚至出現虧損紅字，公司股價也從2013年年底的高點跌回2011年以前的起漲點。但是，在此同時有幾家3D列印的公司，例如EOS、Arcam等，不但業績沒有受影響，反而大幅成長，分析其產品結構可以發現，這一些公司是專注在高階的產品，營收雖然不高，但持續成長，獲利也一樣亮眼。回顧3D列印這個產業進幾年的發展，有部分的產品已經被市場所接受，尤其是B2B的產品；相對的，5,000美元以下的3D印表機銷售量成長很多，但真正進入一般家庭的應該還很少，這代表產品進入B2C市場還有一段距離。
並列摘要
3D printing industry grew in 2015. Revenues of top two manufacturers 3D Systems and Stratasys are not as good as expectation. The company's stock price went down from a higher price to the price at 2011. However, there are several 3D printing companies such as EOS and Arcam continued to grow in sales. Reasons for substantial business growth of those companies are found through the product portfolio analysis. Those companies focused on high-end products and got high on profit even though the revenue is not amazing. 3D printing products and especially the B2B products get more and more attention with the development of 3D printing technology over the years. Market for 3D printers under US $5000 is growing. However, it will still take some time for 3D printers finding their way into homes, just as computers and the internet have.
延伸閱讀
- 薛舜益（2014）。國內外3D列印技術與市場趨勢分析〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2014.00353
- 光電協進會（2016）。「3D列印進階應用研討會」探索國內3D列印軟體發展趨勢。光連：光電產業與技術情報，(122)，26-26。https://www.airitilibrary.com/Article/Detail?DocID=16822862-201603-201607110016-201607110016-26-26
- 許立涵、佟心平、林思穎、林奇秀（2017）。3D列印的發展與應用。圖資與檔案學刊，(90)，32-51。https://doi.org/10.6575/JILA.2017.90.03
- 程治（2009）。3D立體顯示應用產品的現況與未來發展。光連：光電產業與技術情報，(84)，65-70。https://doi.org/10.29664/Optolink.200911.0014
- 邱昱凱（2015）。The prospect of 3D printing〔碩士論文，義守大學〕。華藝線上圖書館。https://doi.org/10.6343/ISU.2015.00045