將高分子金屬複合物之薄膜應用於光學變焦模組

Optical zoom module using Ionic Polymer Metal Composite membrane

陳緯詳(Wei-Shiang Chen)

指導教授 ： 蘇國棟

國立臺灣大學/電機資訊學院/光電工程學研究所/碩士(2015年)

https://doi.org/10.6342/NTU.2015.02208

摘要

離子性高分子金屬複合材料(IPMC)可以在低電壓下驅動且獲得大幅的形變量，反射式方法有折疊光路的優點因此被用在輕薄的變焦系統中， 應用在光學變焦系統中的IPMC可形變面鏡可以透過電壓改變其屈光度。聚二甲基矽氧烷（PDMS）用來作為緩衝層以改善表面粗糙度，而PDMS的表面粗糙度約為17奈米，在3福特的電壓下，IPMC可形變面鏡的屈光度可達73.8 m-1 ，我們製造了一個全反射式的相機模組，並利用兩個IPMC可形變面射鏡來達到縮放功能。縮放比約為1.6倍。

關鍵字

離子性高分子金屬複合材料 ； 聚二甲基矽氧烷 ； 可形變面鏡

並列摘要

Ionic polymer metal composite (IPMC) can be operated at low voltage and get large deformation. The reflective method is utilized in thin zoom system for the advantage of folded optical path. IPMC deformable mirror which used in reflective zoom system can change its optical power by bias voltage. Polydimethylsiloxane (PDMS) is used as the buffer layer to improve surface roughness. The surface roughness of PDMS layer is about 17 nm. Optical power of IPMC deformable mirror can reach to 73.8 m-1 diopter by 3 V. We fabricate the total reflective camera module and use two IPMC deformable mirrors to achieve zoom function. The zoom ratio is about 1.6 times.

並列關鍵字

ionic polymer metal composite (IPMC) ； polydimethylsiloxane (PDMS) ； deformable mirror

參考文獻

1. B. Berge, "Liquid lens technology: principle of electrowetting based lenses and applications to imaging," in Micro Electro Mechanical Systems, 2005. MEMS 2005. 18th IEEE International Conference on(2005), pp. 227-230.

3. M. Shahinpoor, Y. Bar-Cohen, J. O. Simpson, and J. Smith, "Ionic polymer-metal composites (IPMCs) as biomimetic sensors, actuators and artificial muscles - a review," Smart Materials & Structures 7, R15-R30 (1998).

4. C. C. Yeh, and W. P. Shih, "Effects of water content on the actuation performance of ionic polymer-metal composites," Smart Materials & Structures 19 (2010).

5. M. Shahinpoor, and K. J. Kim, "The effect of surface-electrode resistance on the performance of ionic polymer-metal composite (IPMIC) artificial muscles," Smart Materials & Structures 9, 543-551 (2000).

6. B. Bhandari, G. Y. Lee, and S. H. Ahn, "A Review on IPMC Material as Actuators and Sensors: Fabrications, Characteristics and Applications," Int J Precis Eng Man 13, 141-163 (2012).