單向薄膜節流器的新型設計及特性比較

The Comparison of the Characteristcs for the New Type Design of Membrane Regulators

林廷章(Ting-Chang Lin)

指導教授 ： 康淵

中原大學/工學院/機械工程研究所/碩士(2005年)

https://doi.org/10.6840/cycu200500654

摘要

本文研究兩種單向薄膜節流器的設計及特性，此為PM-Flow之一型；供油預壓預調節單向薄膜節流器及本研究設計之新型；供油預壓單向薄膜節流器，探討其節流液阻與壓力比的關係。利用理論及實驗方法，比較兩者之結果，以修正設計參數與性能參數之關係。

關鍵字

承載力 ； 節流器 ； 薄膜 ； 節流參數 ； 剛性

並列摘要

Abstract

The object of this study is to show the comparison the characteristics between the pre-loading with pre-restrict membrane restrictor (PM-Flow regulator) and the pre-loading membrane restrictor. Comparing experimental and theoretical method about the characteristics of the flow resistance between pressured ratio. And to find the characteristics of restricted parameter of new designed membrane restrictor to to modify the designed data.

並列關鍵字

membrane ； pressured ratio ； restrictor

參考文獻

[26] 開式靜壓滑軌之特性分析與驗證，中原大學機械工程學系碩士學位論文，趙家成

[1] Stanley, B. M., and Alfred, M. L., “The Effect of the Method of Compensation on Hydrostatic Bearing Stiffness,” Journal of Basic Engineering, pp.179-187, 1961

[3] Mori H. and Yabe H. “A theoretical investigation on hydrostatic bearing,” Bull. JSME Vol. 6, No. 22, pp.354-363,1963.

[4] Mayer, J. E. and Shaw, M. C. “Characteristics of Externally Pressurized Bearing Having Variable External Flow Restrictors,” ASEM Journal of Basic Engineering, vol. 85, pp. 291, 1963

[7] Rowe, W. B. and O’Donoghue, J. P. , “Diaphragm Valves for Controlling Opposed Pad Hydrostatic Bearing”Proc. I. E. Tribology,(1970.