透過您的圖書館登入
IP:13.58.15.135
  • 學位論文

越庫作業之理貨區相關作業問題探討

指導教授 : 何應欽
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


越庫作業為物流作業中的一種策略,是指在越庫碼頭整合不同供應商的整車貨物後,根據訂單需求將各品項加以拆解、分類及堆放,最後裝上前來載取的卡車,送往顧客所要求的交貨地點;其中,所有品項均不需進貨檢驗,也不需儲存於物流中心之倉庫。越庫作業可省下入庫、儲存等作業,因此特別適合需要快速處理的緊急訂單,且適合將商品直接送到零售商的情況。 本研究針對使用配銷商型越庫(Distributor Cross Docking)之物流中心,從進貨貨車到達,至出貨貨車送出之作業流程。本研究主要探討理貨區的作業問題,分別為貨車訂單選取問題、理貨區儲存格指派問題與理貨區服務問題,並分別提出相對應的貨車訂單選取法則、理貨區儲存格指派法則與理貨區服務法則。最後利用模擬實驗所得到的數據,針對總系統執行時間、總理貨旅行距離、準時率、與總延後時間這四種績效指標下,找出何種組合對作業效率有較顯著的提升。

並列摘要


Cross docking is a strategy of logistics operations which means that when the receiving shipment of inbound truck, according to the requirement from orders, the operators separate, sort, and place the items immediately. Finally, they collect these items on the outbound truck and delivery to the location where customer needs. All the items do not need to do examine and store in the distribution center. Because cross docking does not have the cost of bringing the product items into the warehouse and storing them, it is especially for emergency order that need to handle and delivery to the retailers as soon as possible. This research focuses on the issue of Distributor Cross Docking, from the inbound truck arrives to the outbound truck leaves, and discusses about the operation on it. It is mainly discuss about the operation on tally area, includes order selection problem, cell of tally area assigning problem, and tally area serving problem, and respectively proposes order selection rule, cell of tally area assigning rule, and tally area serving rule. Finally, in this environment, comparing the data by On-time Delivery Rate, Total Tardiness, Total System Time, and Total Picking Distance, which were obtained by simulation experiments, to know which combination of the rules will performs better.

參考文獻


3. 吳詩涵,2011,「在同步分區揀貨倉庫之合作揀貨探討」,國立中央大學工業管理研究所,碩士論文。
9. 陳放子,2007,「整合製造與物流對價值鏈影響之研究」,成功大學工業與資訊管理學系,博士論文。
11. 黃亦莉,2014,「越庫作業區之出貨端相關作業問題探討」,國立中央大學工業管理研究所,碩士論文。
2. Bartholdi III, J. J. and Gue, K. R., 2000, “Reducing labor costs in an LTL cross docking terminal,” Operations Research, vol. 48, no. 6, pp. 823-832.
3. Bartholdi III, J. J. and Gue, K. R., 2004, “The best shape for a cross dock,” Transportation Science, vol. 38, no. 1, pp. 235-244.

延伸閱讀