應用於數位家庭整合計畫之無線傳輸子系統設計考量與實現

Design Consideration and Implementation for an RF Transmission Subsystem in Digital Home Joint Project

宋文安(Wen-An Sung)

指導教授 ： 陳竹一

國立中央大學/資訊電機學院/電機工程研究所碩士在職專班/碩士(2011年)

摘要

基於數位家庭整合計劃的平台上，期望藉由無線通訊傳輸技術的子系統，提出可行性評估及架構考量上之最佳解決方案，提高數位家庭上各種裝置在資料傳輸與相互傳遞之訊息上的應用，經由無線通道連接各種家用電器設備，整合數位家庭中的各類傳輸介面，以發揮更佳的便利性。
本論文的主要目的是，針對低成本、低功率消耗、小體積及高效率輸出為原則，主要工作於ISM 2.4 GHz頻帶，分別為無線射頻收發區塊與微控制器區塊、以及串並列區塊三大部份設計。除了應用頻率鍵移(FSK)數位調變之無線傳輸來証實可行性，並整合軟硬體電路到子系統上，最後利用人機介面來將設計製作之子電路做測量效能，進而完成驗證設計與實現。

關鍵字

數位家庭 ； 圖形人機介面 ； 微控處理器 ； ISM無線射頻

並列摘要

Based on digital home joint project platform, for wireless communication technology subsystems, the thesis aims to propose the feasibility study on the plan and considerations of the best structure solution to improve the digital home. On a variety of devices in the data transmission and the message transmitted between the applications, they are connected with wireless access devices of various household appliances by Integration of various types of transmission interface in the digital home to play better convenience.

There are 4 purposes of this thesis including low cost, low power consumption, small size and high efficiency output. The main operation is in the ISM 2.4 GHz band, RF transceiver block with the microcontroller block and Serial Parallel block design of three parts. In addition to applying the frequency shift keying (FSK) digital modulation for wireless transmission, it is to prove the feasibility and integrate circuits to the subsystem on the hardware and software.
Finally, to measure the feasibility and performance of the circuit by graphical user interface (GUI), it completes the design and implementation verification.

並列關鍵字

Micro-processor ； Digital Home ； ISM RF Transmission ； Graphical User Interface

參考文獻

〔4〕. Y. W. Bai, C. Y. Chang, “Design and Implementation of an Integrated Remote Test System for Mobile Phones”, IEEE International Symposium on Industrial Electronics, July 2009

〔5〕. C. K. Lee, C. C. Ku, K. L. Su, C. H. Lin, K. C. Tao, “A 900MHz IISM Band Transceiver RF IC Chip Set and RF Module”, IEEE MTT-S Digest, 1998

〔6〕. M. J. Pugh, “Implementation of a New RF Monitoring System for the SRS Using LabVIEW”, IEEE 1998

〔7〕. P. V. Nikitin, K. V. Seshagir Rao, “LabVIEW Base UHF RFID Tag Test and Measurement System”, IEEE Transactions on Industrial Electronics, Vol: 56 No: 7, July 2009

〔8〕. J. Lahteenmaki, J. Miettinen, P. Heino, “The Design of Miniature 3D RF Module”, IEEE Electronic Components and Technology Conference, 2005