全自動覆捲機設備機構開發

塑膠薄膜從壓出機(Extruders)生產，出來都是收捲成整捲大捲的，很少有人會在機台設備上裁剪，如果有要分割膠膜或著是剪裁膠膜大多都使用分條機(Slitting Machine)分割，分條機速度雖然快而且一次又可分割多捲但適用於分割較長的膠膜，如果要使用分割較短米數的膠膜或鋁箔就非常不符合經濟效益，橡塑膠的機械設備大多都屬於專用機設備所以要收捲較短的膠膜就使用覆捲機(Rewinder Machine)，覆捲機所用的只有工業用纏繞膜與家庭用保鮮膜和鋁箔在使用。本論文主要是塑膠薄膜覆捲機設備機構開發，覆捲機設備分有手動與全自動，為了符合經濟效應選擇以全自動化設備研究，主要內容機構應用與設計為先以電腦繪圖做設計機構動作，然後在電腦上模擬動作，等動作確認無錯誤完成後，做出一台覆捲機設備然後再試車，試車完後再針對試車後所產生問題做改善，完成後在試車以達到可以正式使用。

關鍵字

導桿氣壓缸；凸輪分割器

並列摘要

Nowadays , most of the plastic film which produced by extruders are rewinded into jumbo rolls , very few to do the cut on the equipments at the same time . however if it is necessary to do the cut , people usually use the slitting machine to done the job . Although the speed of slitting machine is pretty high and capable to get multi rolls at one time , but it’s only suitable for slitting longer length , on the contrary , it’s no any economic efficiency in case for shorter length plastic film or alum. Foil . Frankly speaking , almost each rubber & plastic equipments are for specified purpose , for instance , the rewinder machine is good for rewinding shorter plastic film and alum. Foil , now it is definitely the best equipment for rewinding wrapping film for industry and cling film and alum. foil For kitchen. the subject matter is aiming to develop one excellent rewinder machine which is best for rewinding plastic film . in order to gain more economic efficiency , I particularly select the more sophisticated fully-automatic rewinder machine as my main research instead of another simple manual one . first of all , it is necessary to use computer software to draw the outline and design the basic structure , then demonstrate its every action on the computer , while all the demonstration are proper and perfect , we produce one rewinder according to design , then inspect it’s performance carefully and gradually , improve or modify in case any defects.