- 會議論文
以步階壓力產生器校正動態壓力計
Calibration of Dynamic Pressure Sensors through a Step Pressure Generator
並列摘要
This paper calibrated dynamic pressure sensor through a step pressure generator. In this study, the model of the dynamic pressure sensor system is constructed, and its step response is also derived. By analyzing the relation between the characteristics of the step response and the calibrated parameters, the method to identify the calibrated parameters is then proposed. Finally, the experiments of dynamic pressure sensor calibration are conducted, and the parameters need to be calibrated are all successfully obtained. Our laboratory has constructed the equipment and the method to calibrate dynamic pressure sensors, and will provide the calibration services in the future.
延伸閱讀
- Wang, S. H. (2010). 壓力感測器之液壓步階校正器研製 [doctoral dissertation, National Taipei University of Technology]. Airiti Library. https://doi.org/10.6841/NTUT.2010.00441
- Hsieh, Y. J. (2009). 時脈產生器、壓控震盪器及功率放大器之研製 [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2009.01137
- 鄭香有（2008）。正逆平衡式壓電致動器之結構設計、特性量測與轉速控制〔碩士論文，健行科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0022-3007200813355200
- Huang, Y. C. (2011). 用於減輕掃描鍊位移時電壓降峰值的測試時域最佳化之平行化模擬技術 [master's thesis, National Taiwan University]. Airiti Library. https://doi.org/10.6342/NTU.2011.02500
- 林廷翊（2006）。Dynamic characteristics of pressure square wave generator and hydraulic system piping〔碩士論文，國立臺北科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0006-1007200613320200