- 會議論文
Electrochromic Electrochromic Property of Polyaniline Thin Film and Poly(3-methylthiophene) Thin Film for Display
並列摘要
In this study, the poly(3-methylthiophene) (PMeT) and the polyaniline (PANI) of the conductive polymer electrochromic thin films had been deposited on the indium tin oxide/glass (ITO/Glass) substrate by electrochemical polymerization, respectively. The cycling stability of the electrochromic thin film prepared with the variety of the different charge densities was investigated. The electrochromic behaviors of the PMeT/ITO/Glass and PANI/ITO/Glass were performed in the electrolytes of 0.1 M lithium perchlorate (LiClO4)/propylene carbonate (PC) and 0.1 M LiClO4 + 0.001 M perchloric acid (HClO4)/PC, respectively. The colors of the PMeT thin film exhibited bule and red in oxidation and reduction states, respectively. And the colors of the PANI thin film exhibited green and yellow in oxidation and reduction states, respectively. Furthermore, the absorbance and transmittance (T%) of the electrochromic thin film were measured by ultraviolet-visible (UV-Visible) spectrometer in this study. Besides, in order to find the optimal manufacture conditions of the electrochromic thin film, the potentials of redox reaction and cycles were investigated by the cyclic voltammetry (CV) measurement system to analyze the cycling stability of the electrochromic thin film with the variety of the different charge densities. Finally, the reflectance (R%) of the optimal parameters of the electrochromic thin film were measured by chroma meter in this study. And the variational colors of the electrochromic thin film were observed by the chromaticity coordinates of the commission internationale de l'Eclairage (CIE), so that the electrochromic thin film can be applied to the filed of display.
被引用紀錄
延伸閱讀
- 曹長安（2012）。Fabrication of electrochromic tungsten oxide thin film by electrodeposition method assisted with zinc oxide nanwires〔碩士論文，國立臺灣師範大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0021-1610201315314499
- Hao, S. H. (2010). Pillar Structures of Poly(methyl methacrylate) Thin Film Induced by Electric Field [master's thesis, National Tsing Hua University]. Airiti Library. https://www.airitilibrary.com/Article/Detail?DocID=U0016-1901201111405076
- 游家逢（2007）。Fabrications and Properties ofPoly(3-hexylthiophene) / w-(2-Thienyl) Alkylphosphonic Acids / Titania Layer Heterojunction〔碩士論文，國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU.2007.02530
- Lin, Y. J., Lin, H. Z., & Chin, Y. M. (2016). Poly(3-hexylthiophene):[6,6]-phenyl-C61- butyric acid methyl ester ohmic contact on the transparent conductive oxide films. 真空科技, 29(2), 31-37. https://www.airitilibrary.com/Article/Detail?DocID=1017091x-201606-201607210027-201607210027-31-37
- 陶惟翰、田曜璋、楊正旭、林永森（2003）。The Performance of Electrochromic Thin Film Prepared by Plasma Sputtering。華岡工程學報，(17)，117-132。https://doi.org/10.29987/CCUHKJE.200306.0010