PC-BASED工具磨床再研磨自動化程式開發

The study of auto-reshaping program for PC-Based tool grinder

施登科(Teng-Ko Shih)

國立虎尾科技大學/工程學院/動力機械工程研究所/碩士(2005年)

摘要

本文開發完成自動且智慧化的PC-Based工具磨床做再研磨加工，便可大幅改善依靠技術人員的技術能力之狀態，使再研磨刀具變得很簡單。本文是將鼎維公司生產的一般手動工具磨床CM2，加上PC-Based控制器後，將再研磨的技術Know-How，轉換成程式，放在PC-Based控制器內。使用探針自動定位，開發成自動且智慧化的工具磨床。

並列摘要

The main focus of the paper was on the PC-Based controller set up on the CM2 tool grinder produced by the Work-Top Corp in Taiwan. The relative cutting parameters with Know-How are also transferred to an useful program and developed in the machine. Using probe to orientated cutter. It makes the machine run automatic with AI.

參考文獻

3. Rober, Stephen J., Shin, Yung C., “Modeling and control of CNC machines using a PC-based open architecture controller”, Mechatronics Volume: 5, Issue: 4, June, 1995, pp. 401-420.

23. 劉元平, “傳統磨床半智慧化研發”, 國立虎尾科技大學碩士論文, 2004.

1. Suh Suk-Hwan, Noh Sung-Kee, Choi Yong-Jong, “A PC-based retrofitting toward CAD/CAM/CNC integration”, Computers & Industrial Engineering Volume: 28, Issue: 1, January, 1995, pp. 133-146.

2. Hamade, R.F., Zeineddine, F., Akle, B., Smaili, “A.Modelangelo: a subtractive 5-axis robotic arm for rapid prototyping”, Robotics and Computer-Integrated Manufacturing Volume: 21, Issue: 2, April, 2005, pp. 133-144.

4. Kuo Lun-Yu, Yen Jia-Yush, “Servo parameter tuning for a 5-axis machine center based upon GA rules”, International Journal of Machine Tools and Manufacture Volume: 41, Issue: 11, September, 2001, pp. 1535-1550.