透過您的圖書館登入
IP:3.128.199.210
  • 學位論文

應用LabVIEW開發脈波反應非破壞檢測軟體

Development of an Impulse Response Nondestructive Testing Software with LabVIEW

指導教授 : 賴俊仁
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


近年來由於科技之進步,非破壞檢測技術對公共工程構造物在施工期間之品質管制與長期使用之安全評估具有無可取代之重要性。在歐美等先進國家經歷多年之努力,土木工程非破壞檢測技術之發展已有相當成果。其中之脈波反應法(Impulse Response)更是常用來檢測基樁之完整性的一種技術。而傳統儀器有操作不便、介面呆版、互動不佳之缺點。 本研究以現有的衝擊鎚為敲擊源,加速度規為接收器,利用LabVIEW軟體為開發環境,使用類比數位轉換卡進行波型訊號之擷取及轉換成數位數據,研發出一套以脈波反應檢測技術為基礎的非破壞檢測軟體,該軟體具備訊號擷取及立即分析運算的能力,建構出圖形化輸入介面之形式,讓使用者在人性化的面版上,進行資料擷取、分析與展現。 綜合本研究之經驗得到以下的結論:以LabVIEW軟體來撰寫程式,與傳統程式語言相較下,減少開發時間及金錢,並且確實把硬體設備縮小。對於訊號擷取與分析運算,可在相同的視窗介面下同時進行,不但增加使用者與系統的互動且介面簡單化,建立出人性化的檢測系統。

並列摘要


In recent years, the advancement of Non-destructive Testing (NDT) technology is incomparably important for the infrastructure structure in its quality control during construction period and in its safety evaluation for long-term use. With many year’s efforts, development of the NDT techniques reaches considerable achievement in Europe and America. Among them, the Impulse Response method is a technology that is often used to evaluate the integrity of piles. However, most the traditional NDT equipments are base on command prompt user inter face and are most use friendly. The objective of this thesis is to develop an Impulse Response NDT system which uses existing impact hammer as the impact source, accelerometer as the receiver, and uses an analog-to-digital (A/D) converter to convert the analog signal into digital form. The software utilizes a graphic at user interface thus making data retrieval, data analysis and data presentation in a single step. Based on the experience learned form this research, it can be concluded that: in comparison to the traditional programming language, using the LabVIEW platform can save development time and money. In addition, the resulting interface is much more user friendly, than tradition at NDT equipment.

並列關鍵字

Impulse Response data retrieval LabVIEW

參考文獻


3. 李俊男,『脈波反應法應用於基樁之模擬與分析』,碩士論文,成功大學土木工程學系,2005。
6. 曾志瑋,『現地跨孔波速檢測軟體之開發』,碩士論文,朝陽科技大學營建工程系,2009。
參考文獻
1. 廖述濤,『基樁之脈波反應測試及力學導納分析』,中華民國非破壞檢測協會,第14 卷,第2 期(3-4),第94-103 頁,(1996)。
2. 王弘義,『基樁應力波非破壞檢測技術之比較評估』,碩士論文,朝陽科技大學營建工程系,2003。

被引用紀錄


陳志偉(2012)。LED色度座標量測校正系統之開發〔碩士論文,國立屏東科技大學〕。華藝線上圖書館。https://doi.org/10.6346/NPUST.2012.00204
巫宜親(2011)。擋土牆自動安全監測系統開發〔碩士論文,朝陽科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0078-0305201210333318
陳俊瑋(2012)。應用LabVIEW開發基樁表面反射非破壞檢測軟體〔碩士論文,朝陽科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0078-0305201210333728
陳建妏(2013)。多頻道表面波頻譜分析檢測軟體開發〔碩士論文,朝陽科技大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0078-2712201314042986

延伸閱讀