Title

The Effectiviness of Warm Mix Asphalt (WMA) Additives Affected by the Type of Aggregate and Binder

DOI

10.6135/ijprt.org.tw/2013.6(5).554

Authors

Zhao-Xing Xie;Wen-Zhong Fan;Li-Li Wang;Ju-Nan Shen

Key Words

Aggregate ; Properties ; Warm Mix Asphalt ; WMA Additives

PublicationName

International Journal of Pavement Research and Technology

Volume or Term/Year and Month of Publication

6卷5期(2013 / 09 / 01)

Page #

554 - 561

Content Language

英文

English Abstract

The objective of this research was to select the most effective Warm Mix Asphalt (WMA) additives for WMA practice based on a series of laboratory testing programs such as density, Marshall stability, freeze-thaw splitting strength, dynamic stability, and bending beam strain. The experimental design of WMA mixtures included the use of three commonly-used WMA additives (Sasobit, Rediset and Evotherm), two types of aggregate (Basalt and limestone), and two types of asphalt (unmodified and SBS modified). Results showed that: (1) Most of WMA with Sasobit had the higher mechanical strength, whereas all WMA with Evotherm had the lowest. (2)When basalt Aggregate was used, Sasobit additive was the more effective on IDT and TSR. For all WMA, Evotherm additive was the less effective on IDT. (3) Sasobit additive had better effectiveness on resistance to rutting among all WMA. (4) When basalt aggregate was used, Rediset additive was more effective on bending failure strain. When limestone aggregate was used, Sasobit and Evotherm additive was more effective.

Topic Category 工程學 > 土木與建築工程
工程學 > 道路與鐵路工程
Reference
  1. Gandhi, T. (2008). Effects of Warm Asphalt Additives on Asphalt Binder and Mixture Properties. Ph.D. dissertation, Clemson Univ., Clemson, SC, USA.
    連結:
  2. Sasol Wax. Citing online sources: http://www.sasolwax.com/Sasobit_Technology.html
    連結:
  3. Federal Highway Administration. Citing online sources: http://www.fhwa.dot.gov/pavement/asphalt/wma.cfm
    連結:
  4. MeadWestvaco Corporation. Citing online sources: http://www.meadwestvaco.com/SpecialtyChemicals/AsphaltA dditives/MWV002106
    連結:
  5. AkzoNobel. Citing online sources: http://sc.akzonobel.com/en/asphalt/Pages/applications-warmmix. aspx
    連結:
  6. Akisetty, C.K.K. (2008). Evaluation of warm asphalt additives on performance properties of CRM binders and mixtures. Ph.D. Dissertation, Clemson Univ., Clemson, SC, USA.
    連結:
  7. Hurley, G.C. and Prowell, B.D. (2005). Evaluation of Asphamin for use in Warm Mix Asphalt. National Center for Asphalt Technology, NCAT Report 05-04, Auburn, AB, USA.
    連結:
  8. Hurley, G.C. and Prowell, B.D. (2005). Evaluation of Sasobit for use in Warm Mix Asphalt. National Center for Asphalt Technology, NCAT Report 05-06, Auburn, Alabama, USA.
    連結:
  9. Hurley, G.C. and Prowell, B.D. (2005). Evaluation of Evotherm for use in Warm Mix Asphalt. National Center for Asphalt Technology, NCAT Report 06-02, Auburn, Ab, USA.
    連結:
  10. Biro, S., Gandhi, T., and Amirkhanian, S. (2009). Midrange Temperature Rheological Properties of Warm Asphalt Binders.” Journal of Materials in Civil Engineering, 21(7), pp. 316-323.
    連結:
  11. Xiao, F., Jordan, J. and Amirkhanian, S.N. (2009). Laboratory Investigation of Moisture Damage in Warm Mix Asphalt Containing Moist Aggregate. Transportation Research Record, No. 2126, pp. 115-124.
    連結:
  12. Kasozi, A.M. (2010). Properties of warm mix asphalt from two field projects: Reno, Nevada and Manitoba, Canada. M.S. dissertation, University of Nevada, Reno, NV, USA.
  13. Rogers, W. (2011). Influence of warm mix additives upon high RAP asphalt mixes. Ph.D. Dissertation, Clemson Univ., Clemson, SC, USA.
  14. Alossta, A. (2011). Evaluation of Warm Mix Asphalt Versus Conventional Hot Mix Asphalt for Field and Laboratory-Compacted Specimens. Arizona State University. Tempe, AZ, USA.
  15. Sheth, N.M. (2010). Evaluation of selected warm mix asphalt additives. M.S. thesis, University of Iowa, Iowa, Iowa, USA.
  16. Hanz, A.J. (2012). Quantifying the Impacts of Warm Mix Asphalt on Constructability and Performance. Ph.D. Dissertation, University of Wisconsin - Madison, WI, USA.
  17. Sampath, A. (2010). Comprehensive evaluation of four warm asphalt mixture regarding viscosity, tensile strength, moisture sensitivity, dynamic modulus and flow number. M.S. thesis, University of Iowa, Ames, Iowa, USA.
Times Cited
  1. 張仕明(2014)。以影格中的不變特徵為基礎的全景修補演算法。淡江大學資訊工程學系博士班學位論文。2014。1-71。 
  2. 鄧翔允(2008)。聚丙烯丁酯共聚物及其奈米複合材料在膠態光敏型太陽能電池上的應用。臺灣大學材料科學與工程學研究所學位論文。2008。1-162。 
  3. 林怡光(2005)。聚甲基丙烯酸甲酯/蒙托石複合材料及聚苯乙烯/蒙托石複合材料之製備。臺灣大學材料科學與工程學研究所學位論文。2005。1-108。 
  4. 詹勳涵(2005)。EVA/Clay奈米複合材料流變性質之研究。臺北科技大學化學工程研究所學位論文。2005。1-107。
  5. 李榮哲(2006)。熔融插層製備三元乙丙橡膠(EPDM)/黏土奈米複材及其性質研究。臺北科技大學有機高分子研究所學位論文。2006。1-96。
  6. 王于仁(2007)。不同VA含量之EVA/clay奈米複合材料流變性質之研究。臺北科技大學化學工程研究所學位論文。2007。1-117。
  7. 朱偉綸(2010)。物件導向程式演化至觀點導向程式之回歸測試。臺北科技大學資訊工程系研究所學位論文。2010。1-62。
  8. 呂維源(2016)。滿足時空查詢之最佳旅遊軌跡。中原大學資訊工程研究所學位論文。2016。1-52。
  9. 阮文邦(2017)。Euonymus laxiflorus Champ 以及 Paenibacillus sp. TKU042 所生產α-葡萄糖苷酶抑制劑與α-澱粉酶抑制劑之研究。淡江大學化學學系博士班學位論文。2017。1-84。