透過您的圖書館登入
IP:3.144.189.177
  • 期刊

營造業墜落重大墜落之情境分析與預防策略

In-Depth Analysis and Prevention of Fatal Falls in Construction Industry

摘要


深入瞭解職業意外事故發生的原因,可將有限的防災資源集中投入在較易發生職災的情境因素,以獲取預防與控制職災的最大效益。Tuominen與Saari (1982)認爲找出影響意外事故發生與否的因素,是避免職業意外事故的基礎。這些可能的潛在因素包含工作者的個人因素、營造作業環境、作業機具、從事的作業類型及管理因素,這些影響因素的組合就是引發意外事故的主要情境,因此本研究分析台灣地區民國90-94年間營造業墜落重大職災的414個案,從中分析出引發營造業墜落重大職災的主要情境。先找出每件墜落個案的個人因素(年齡、性別、工作經驗)、執行作業、環境因素、管理因素(公司雇用人數、安全設施及個人安全裝備)、發生原因及墜落地點;接著採用標準化發生比SMR比較不同年齡、性別、公司規模的差異,並統計各因素的次數分配。由於營造工地現場除了個人安全裝備是穿戴在勞工身上外,其餘的防墜措施均設置在有墜落之虞之地點,不同的作業地點其適合的防墜措施有所差異,因此採用墜落地點作爲選用防墜措施的參考,並應用Phi分析找出墜落原因及墜落地點的相關性,提出有效的防災策略,以期降低墜落職災發生率。

並列摘要


Accident analysis is an important source of information when developing accident prevention strategies and decisions. As stated by Tuominen and Saari (1982), an essential phase of accident analysis is the specification of factors found to influence the identified events. These factors may include individual factors, working environment, tools, and performed tasks. The current study analyzed 414 work-related single fatalities from the years 2001 to 2005 in terms of individual factors (age, gender, and experience), performed tasks, environmental factors, management factors (the company size measured by the number of workers, safety equipment, and the use of personal protective equipment), causes of these accidents, and site of the fall. The Standardized Mortality Ratio (SMR) was used to compare different levels of age, gender, and company size, and to control for these factors. Besides personal protective equipment, other fall protection measures are used at potential falling sites. Therefore, potential protection measures were determined based on significant associations between cause of the fall and the falling site. Results from this analysis could lead to more effective safety training, protective equipment and devices, and compliance with established procedures.

參考文獻


Chi C F,Chang T C,Hung K H.(2004).Significant industry-source of injuryaccident type for occupational fatalities in Taiwan.International Journal of Industrial Ergonomics.34,77-91.
Kartam NA,Flood I,Koushki P.(2000).Construction safety in Kuwait: issues, procedures, problems, and recommendations.Safety Science.36,163-184.
Drury C G,Brill M.(1983).Human Factors in Consumer Product Accident Investigation.Human Factors.25,329-342.
Chi Chia-Fen,Wu Meng-Lin.(1997).Effects of age and occupation on occupational fatality rates.Safety Science.27,1-17.
Bustani S J.(1988).Relative risk analysis of injuries in coal mining by age and experience at present company.Journal of Occupational Accidents.10,209-216.

被引用紀錄


王毓娸(2013)。安全帶與墜落姿勢對人體加速度之影響〔碩士論文,國立臺北科技大學〕。華藝線上圖書館。https://doi.org/10.6841/NTUT.2013.00277
李珮瑜(2012)。高架作業墜落分析與配戴安全帶效用研究〔碩士論文,中山醫學大學〕。華藝線上圖書館。https://doi.org/10.6834/CSMU.2012.00019
林育昇(2015)。起重機作業之災害原因分析和預防對策之探討〔碩士論文,長榮大學〕。華藝線上圖書館。https://doi.org/10.6833/CJCU.2015.00145
許至佑(2009)。南投縣消防任務知識地圖之探究〔碩士論文,亞洲大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0118-1511201215460732
江委螗(2010)。鷹架上的悲歌─營造業職災勞工及家屬生活適應與社會工作介入之探討〔碩士論文,亞洲大學〕。華藝線上圖書館。https://www.airitilibrary.com/Article/Detail?DocID=U0118-1511201215464439

延伸閱讀