應用UHF RFID系統於LED照明燈具之節能研究

A Study of Saving Energy by UHF RFID on LED Array Manipulation

郭展瑋(Jhan-Wei Guo)

指導教授 ： 林啟瑞 ； 蔡哲雄

國立臺北科技大學/機電學院/機電整合研究所/碩士(2010年)

https://doi.org/10.6841/NTUT.2010.00022

摘要

本研究利用LED照明燈具取代傳統日光燈或T5燈管做為照明光源，達到節約能源的目的，再應用UHF RFID系統的遠距離讀取標籤及和即時訊號反饋之特性，來當作LED照明的控制系統。RFID電子標籤與天線的搭配感應方式，可依照物體不同狀態調控不同照度，可以容易的達到照明亮度的改變，並依照CNS照度規範，最多能夠節省50%的用電能源，有效達到節能的目的。另外，利用多RFID對資料的可辨識性，由電子標籤儲存不同的資訊，以遠距離讀取實現遠端無線無電的燈具亮度調整。所以LED照明結合RFID技術，實現分區調整照明亮度，可以達成能源節約之目的。

關鍵字

LED燈具 ； 無線射頻辨識 ； 超高頻 ； 光源調控 ； 節能 ； 紅外線感測器

並列摘要

In this study, we use the LED lighting to replace the traditional fluorescent or T5 lamp as a light source to achieve energy saving. Also, we use UHF RFID systems features that have long-range read tag and instant feedback signals to control the LED lighting system. RFID tag and antenna inductive method can easily to achieve the brightness of the illumination by the different objects’ status to control different illumination. It also can achieve the purpose of energy-saving according to CNS illumination standard and save energy up to 50% of electricity. In addition, we use the multiple RFID identification of the data which is available from different information on electrical tags to achieve a wireless remote reading lamp brightness adjustment without electricity. Therefore, if we combine the LED illumination and RFID technology, and realize the idea of adjustment of levels of brightness by different districts, we can achieve the purpose of saving energy.

並列關鍵字

LED lamps ； radio frequency identification ； ultra-high frequency ； light control ； energy saving

參考文獻

[6] C. C. Chang, K. P. Chu and Y. C. Lai，"The Characterization and Fabrication of Pyroelectric Infrared Sensor" Tamkang Journal of Science and Engineering, Vol. 8, No 3, 2005, pp. 203_206.

[16] International Telcommunication, "Union, Frequently asked questions," 2005, http://www.itu.int/ITU-R/terrestrial/faq/index.html

[19] Accenture, “Radio Frequency Identification (RFID),” White Paper,Nov.2001.

[23] M. Kasteka, H. Maduraa, M. Morawskia, T. Piatkowskia, E. Powiadaa and H. Polakowski，"Test bed for measurement of angular parameters of passive infrared sensors"，Volume 49, Issue 3, January 2007, Pages 198-201

[26] Barr, Michael. "Pulse Width Modulation," Embedded Systems Programming, September 2001, pp. 103-104.