透過您的圖書館登入
IP:3.138.33.87
  • 學位論文

混合式生產策略下之供應鏈存貨模式

Hybrid Production Strategy in a Supply Chain Inventory System

指導教授 : 黃惠民
若您是本文的作者,可授權文章由華藝線上圖書館中協助推廣。

摘要


中文摘要 現今整合供應鏈管理之環境下,因資訊科技的發達,導致產品的生產前置時間大大縮短。然而要達到高品質、高顧客滿意度與快速反應顧客需求,則必須透過上下游廠商間的相互合作,準確地掌握存貨以及資訊傳遞,以藉此降低彼此各項作業成本支出,尋求整體之最佳化,達到雙贏的局面。為了使供應鏈生產流程更為順暢,製造商採用混合式生產策略(Hybrid Production System),快速反應顧客之需求。 本研究主要課題為探討製造商生產策略為混合式生產系統的供應鏈流程。問題假設單一供應商、製造商與零售商,對混合式生產在供應鏈管理環境裡作有效的整合與設計。本研究建立數學模式與利用軟體程式作為求解之工具,試圖尋求出最適當之交貨點與交貨量,以達到整體總成本最小化。我們期盼能有效的縮短前置時間與提升顧客服務水準。

並列摘要


ABSTRACT Due to the rapid growth of information technology in modern integrate supply chain management. The production lead time of products has decreased. In order to achieve customer satisfaction, high quality and quick response time, we must integrate the upstream and the downstream companies. Through proper inventory control, we can reduce the cost of operation. In order to coordinate the supply chain production process, a Hybrid Production System is used in the study. Production strategies of manufacturer in Hybrid Production System can response to the customer demand rapidly. One supplier, one manufacturer and one retailer are assumed. We develop a mathematical model and write a program to derive the minimal cost system.

參考文獻


6. 徐國智(2002),產能限制下的混合式生產環境設計,私立中原大學工業工程研究所論文。
11. Arreola-Risa, A. and Decroix G. A., 1998,“Make-to-order versus make-to-stock in a production-inventory system with general production times”, IIE Transactions, Vol 30, pp.705-713.
13. Banerjee, A. and Baneriee, J., 1994, “A coordinated order-up-to inventory control policy for a single supplier and multiple buyers using electronic data interchange”, International Journal of Production Economics, Vol.35, pp.85-91.
14. Banerjee, A. and Burton, J. S., 1994,“Coordinated vs. Independent inventory replenishment policies for a vendor and multiple buyers”, International Journal of Production Economics, Vol. 35, pp.215-222.
16. Boxma, O.J. and Perry, D., 2001,“A queueing model with dependence between service and interarrival times”,European Journal of Operational Research, Vol.128, pp.611-624.

被引用紀錄


李建楓(2009)。偏光片供應鏈垂直整合策略〔碩士論文,中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200901270
陳寧世(2009)。在混合式生產策略下考量風險之庫存品項選擇—以被動元件電感為例〔碩士論文,中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200901112
陳佳宏(2004)。整合新產品(成長期)供應鏈之生產及配送策略〔碩士論文,中原大學〕。華藝線上圖書館。https://doi.org/10.6840/cycu200400273
許秀如(2011)。訂單式生產導入供應商看板系統之應用與探討-以某汽車零件廠為例〔碩士論文,元智大學〕。華藝線上圖書館。https://doi.org/10.6838/YZU.2011.00033
郭哲銘(2016)。考量栽種具多期採收特性作物之植物工廠排程研究〔碩士論文,國立臺灣大學〕。華藝線上圖書館。https://doi.org/10.6342/NTU201602750

延伸閱讀