應用SCEM於漸變斷面彈性梁柱之分析研究

Application of Spline Collocation Element Method in Analysis of Tapered Elastic Beam-Column

劉致瑋(Chih-Wei Liu)

指導教授 ： 吳賴雲

國立臺灣大學/工學院/土木工程學研究所/碩士(2004年)

https://doi.org/10.6342/NTU.2004.00045

摘要

一般求解包含軸向負載及橫向載重之等斷面彈性梁柱問題，其控制微分方程具有一定的規律利於方便求解，但若因考量多項因素而必須分析漸變斷面彈性梁柱結構之各項問題時，發現其變為一複雜的變係數常微分控制方程式求解問題，因而並非容易求得解析解。
本文將以先行對漸變斷面彈性梁柱模型的假設，配合修正後的Spline Collocation Method及予以元素化之Spline Collocation Element Method (簡稱SCM與SCEM)，進行對漸變斷面彈性梁柱之分析。利用SCM與SCEM直接模擬漸變斷面彈性梁柱之控制方程式，並以查表的方式取代原本複雜之積分過程，進而轉為求解聯立代數式而得出結構物各項數值解的方法，讓我們可以看到其求解過程的便利性。且其能不侷限於任何形式的載重或邊界支承條件，僅需結構之反應控制方程式，即能求得令人滿意之近似解，並由於其計算過程方便於電子運算，若以編撰程式加以分析，則將更為省時。
最後以多個數值實例闡釋SCM與SCEM理論分析步驟及其分析所獲致之結果，並與其它精確數值解進行結果分析比較，藉以凸顯SCM與SCEM應用於漸變斷面彈性梁柱之實質優點，俾提供結構工程設計之參考。

關鍵字

漸變斷面彈性梁柱 ； 楔函數插入法

並列摘要

In general, the governing differential equation problem of an initial straight elastic beam-column subjected to an axial force and a lateral load with uniform cross-section has certain rule to be solved easily. Sometimes we must analyze all kinds of questions of tapered elastic beam-column structure in order to consider some reasons, and the questions have been complicated problems of solving ordinary differential equations with various coefficients. Therefore they are not easy to find analytic solutions.
In this paper, analyses of tapered elastic beam-column assumed by establishing models are conducted using the modified spline collocation method and spline collocation element method (SCM&SCEM). SCM and SCEM can be applied to tapered elastic beam-column by direct use of governing equation, and it is more convenient that the coefficient matrix for the weighting coefficients can be assembled simply by finding from the table for the values of quintic spline function at knots without process of complicated calculation. In addition, the reasonable results of the tapered elastic beam-column undergoing various types of loadings and boundary conditions can be obtained just needing the governing equation, and it is more economical and time-saving for writing computer programs which use less arithmetic operators.
By comparing with other accurate numerical solutions at last, it is shown that the analyses of the tapered elastic beam-column problems by the SCM and SCEM are stable and convergent, and the excellent accuracy in results is achieved. Besides, the ease of using this method has been clearly shown.

並列關鍵字

Tapered Elastic Beam-Column ； Spline Collocation Element Method ； SCEM

參考文獻

2.Jang, S. K., “Application of Differential Quadrature to Static Analysis of Structural Components,” PhD dissertation, The Univ. of Oklahoma, Norman, Okla. (1987).

3.Jang, S. K., Bert, C. W., and Striz, A. G., “Application of Differential Quadrature to Static Analysis of Structural Components,” Int. J. Numerical Methods in Engrg., 28, pp. 561-577 (1989).

4.Wang, X. and Bert, C. W., “A New Approach in Applying Differential Quadrature to Static and Free Vibrational Analysis of Beams and Plates,” J. Sound and Vibration, 162(3), pp. 566-573 (1993).

5.Chen, C. N., “Vibration of Prismatic Beam on an Elastic Foundation by the Differential Quadrature Element Method,” Computers and Structures, 77, pp. 1-9 (2000).

6.Prenter, P. M., “Splines and Variational Methods,” John Wiley & Sons, Inc., New York, N. Y. (1975).